Drywall Installation & Repair
Drywall Installation & Repair in Burnsville, MN
Hanging, taping, patching and finishing, done so the repair disappears under paint instead of showing through it.
Serving Burnsville and the West & South Twin Cities Metro
Drywall Installation & Repair in Burnsville, MN and the Twin Cities Metro
Drywall work only gets judged when the light hits it and the paint is dry. A patch that looks fine unfinished often shows every ridge once it is coated, which is why taping and finishing quality matters as much as the patch itself.
We treat drywall as its own craft with its own stages: hang, tape, mud in passes, sand, then prime. Skipping a pass is what produces the visible outlines and cracks that reappear months later.
Common problems this solves
These are the problems homeowners actually call about, and the reason the preparation matters more than the finish coat.
Holes and damage from doors, furniture and renovations
Small and medium holes can be patched cleanly without replacing whole sheets, restoring the surface for a fraction of the disruption.
Cracks that keep coming back
Recurring cracks are often a movement or bonding issue rather than a cosmetic one. Proper taping and bedding addresses the cause so the repair lasts.
Water-damaged ceiling and wall areas
Water damage has to be assessed for whether the material is sound before finishing. We identify what needs removal and replacement and flag anything needing further attention.
Uneven surfaces that catch raking light
Waviness and visible seams are finishing issues. Skim coating and proper feathering produce a surface that reads flat across a wall.
How we prepare and work
The steps below are the actual sequence, not marketing language. Skipping any one of them is where drywall installation & repair jobs go wrong.
Assessment of the damage
We determine whether the existing material is sound, whether it contains moisture damage, and how much needs removal.
Hanging and securing
New drywall or patch material is installed and secured so the surface is stable before finishing begins.
Taping and mudding in passes
Joints and patches are taped and bedded, then coated in successive thin passes that widen and feather each time.
Sanding and inspection
The surface is sanded smooth and checked under light for ridges and seams before priming.
Priming for paint
Finished drywall and patches are primed so the texture absorbs paint evenly and the repair does not flash through.
Recent drywall installation & repair projects
A look at recent work from our own projects. We add photos as jobs are completed and photographed.
Frequently asked questions
Can you match existing wall texture?
Matching texture is part of the work. Existing texture is assessed and replicated so repairs blend with the surrounding surface rather than sitting visibly proud of it.
Do you repair water damage?
We repair drywall affected by water where the underlying cause has been addressed. If there is evidence of an active leak or a broader moisture problem, we flag it so it can be resolved before closing the wall back up.
Will the repair show after painting?
Properly taped, feathered and primed repairs should not be visible. Visible patches usually mean passes were skipped or the surface was not primed before painting.
Do you paint after the drywall work?
Yes, painting is available as part of the same project, which keeps the finishing and the coating under one scope instead of splitting responsibility between trades.
How much dust does drywall sanding create?
Sanding produces dust. We protect the surrounding area and control it during the work, and we tell you what to expect before we start.
Related services
Ready to talk about your drywall installation & repair project?
Tell us what you are working with and get a written, no-obligation estimate covering preparation, products and scope.